1973-1977 Chevelle Baer Tracker Adjustable Tie Rod Ends 3301013

The Baer Tracker adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8 inch heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875 inch of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!

 

• Sleeve Length:

  • 9.700 inch

• Inner sleeve thread size:

  • 11/16 inch x18 LH Thread

• Outer sleeve thread size:

  • 5/8 inch x18 RH Thread

• Heim:

  • 5/8 inch x 5/8 inch Teflon lined

• Applications:

  • 1973-1977 GM A-Body with stock spindles

 

• Kit Features:

  • Direct bolt on upgrade
  • Fully adjustable
  • Simple installation
  • Tapered pin for NO spindle modifications
  • Vehicle specific

Manufacturer Part Number : 3301013

Part Notes:

1973-1977 GM A-Body cars with stock spindles. 1971-1972 GM A-Body cars with GM B-Body spindles. 1975 Pontiac Firebird with stock spindles Note: There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for the late design with OE outer end measuring 8.750" from center of bowl to end of tie rod. 1976-81 Pontiac Firebird with stock spindles.1980-81 Chevrolet Camaro 6 cylinder only with stock spindles.