1967-1969 Camaro Custom Trunk Panel Kit 317-6

This pre-cut custom trunk panel set makes it easy to clean up your trunk. Each kit includes pre-cut hardboard panels to cover the floor, trunk divider area, and the sides of the trunk saving you or your upholstery shop hours over hand trimming your own custom panels. Add your choice of finishing material such as carpet (not included) and you will have a clean and modern looking trunk to set your muscle car apart from the crowd! These kits are manufactured from 1/4 inch hardboard.

Manufacturer Part Number : 317-6

Part Notes:

Based on your particular car, you may find it necessary to custom-trim here and there, depending upon: the type of material you choose to cover the trunk kit panels, how much foam you add or how you decide to custom finish your panels. If you do find it necessary, a quick trim adjustment using an electric sander with 80 grit paper or a rasp file is all that will be required. Please note, that once modified, this item is non-returnable. For some installations, it will be necessary to remove the spare tire hold down brackets using a cutoff wheel. A typical stock trunk area is on most sedans and hardtops. This is where the installation process is the same, regardless. Trim sanding is all that will be needed. For convertible, it will be necessary to trim the panels.