1993-2002 Camaro UMI Complete Coilover Kit, Single Adjustable, 850/200lb Springs 20-850275T

UMI's 1993-2002 Camaro race coilover package is built to outperform. Developed in conjunction with Strano Performance Parts/Sam Strano, double digit national SCCA auto-x champion, these Afco built monotube dampers provide race winning road race and auto-x performance. The package includes rebound adjustable dampers with a race oriented fixed compression valve code. The 40-position digressive rebound curve is designed for competition body and weight transfer control. Spring rates are 850 lb/in front and 275 lb/in rear. These rates and damping curves in conjunction with available 35mm/22mm sway bars provide race winning performance for road race and auto-x as well as an acceptable street ride. UMI's aluminum body shocks and steel coilover brackets are race-proven under punishing conditions. Ride height adjustment range is stock to 2-1/2 inches lowering. Every part of this competition proven package is 100% made in the USA.
UMI's complete system includes: 4 coilover shocks, 4 springs with proper spring rate, fabricated bolt-in mounting brackets and hardware, thrust bearings for each shock and a spanner wrench for height adjustments.
Features:

• Valve in conjunction with SCCA Champion Sam Strano
• Road race and auto-x tested
• UMI bolt-in double shear brackets on all four corners - competition proven
• Front upper fabricated shock mount removes rust-prone GM rubber shock mount
• Front shocks assembled with progressive rate bump stops
• Double bearing shocks for crisp response, zero deflection and high reliability
• Afco aluminum body shocks built in Indiana, USA
• Rebound adjustable (digressive) monotube with Strano tuned valving
• 150 psi monotube provides quick reaction and fade-free performance
• Medium-firm fixed compression
• 850 lb/in front and 275 lb/in rear standard
• Balanced for use with UMI or Strano 35mm/22mm sway bars
• Ride height from stock to 2-1/2 inches lowering
• 100% Made in the USA

Manufacturer Part Number : 20-850275T

Part Notes:

UMI highly recommends running factory rear rubber bump stops in conjunction with the rear coilover kit. If the factory rubber bump stops are damaged or missing, replacement part number UMI-2056 is recommended. We do not recommend using polyurethane bump stops.Helpful Articles:

• Shocks VS Coil Overs