1998-2002 Camaro UMI Torque Arm Relocation Kit, TH350, Black 2212-B

Installing a TH350 Automatic transmission into your 1998-2002 Camaro just got easier. This cross-member with integrated torque arm mount features the correct provisions for mounting the TH350 transmission while still allowing the use of a factory style torque arm. The built in torque arm mount will work with virtually any stock style aftermarket torque arm as well as the factory torque arm and features instant center adjustment by moving the front of the torque arm up or down. This unit is built using DOM mild steel tubing, 0.188 inch mild steel mounting plates and includes all appropriate hardware needed for the installation. The torque arm mount is machined from 0.250 inch thick mild steel and features a new clam shell for appropriately attaching the torque arm to the new cross member. There is no need to purchase any other torque arm brackets when using this kit.
Features:

• This kit allows the installation of a TH350 transmission into a 98-02 F-Body and features provisions for running a stock style torque arm
• Designed to tuck tight against the vehicle chassis and will not effect vehicle ground clearance
• This setup will work with virtually any torque arm on the market as long as it bolts into the stock location. It will also work excellent with the stock torque arm when using a 1 piece bushing
• This crossmember in most cases will save weight over the stock unit while being structurally stronger
• This kit is 100% bolt-in and requires no drilling, cutting or welding. It bolts in place of the stock cross member using the existing holes

Manufacturer Part Number : 2212-B

Part Notes:

This kit must be used with a solid one-piece polyurethane bushing. It will not work with the factory bushing that utilizes a two-piece design. If using a stock torque arm with this relocation kit an aftermarket polyurethane bushing must be purchased.