1972 Chevelle Engine Harness, Sweep Style Speedometer Small Block ,Warn Lts, SI Alt, HEI 41641

This is a correct 1972 Chevrolet engine harness for cars with a sweep style speedometer. All of our harnesses are assembled in the USA using factory correct colors and gauges and are guaranteed to fit exactly as original. All of our harnesses are wrapped in the correct non-adhesive or cloth tape just as factory and feature the correct connectors to make installation a breeze. This harness is modified for use with an HEI distributor. This harness attaches at the firewall to the bulkhead connector (back of the fuse box) and routes along the firewall. It contains all of the following wires:• 1 way white connector with pink and yellow wires for the "Bat" connection on the H.E.I. Distributor, Ring terminal with black fusible link wire for the Horn Relay, Ring terminal with red wire for the Horn Relay, 2 way connector with red and brown wires connects to the vehicles Forward Lamp Harness, Rubber mold-on connector with dark blue wire for the Oil Pressure Sending Unit, 2 way connector with dark green and dark green with a white stripe wires for Temperature Sending Unit, 1 way connector with tan wire for the Idle Stop Solenoid, Rubber mold-on connector with orange wire for the Heater Blower Motor, Rubber mold-on connector with black wire for the T.C.S. Switch, 2 way connector with tan and dark blue for the Vacuum Advance Solenoid, Ring terminal with red wire for the Alternator, 2 way connector with red and brown for the Alternator, Ring terminal with brown fusible link wire for the "Bat" terminal on the Starter Solenoid, Ring terminal with yellow wire for the "R" terminal on the Starter Solenoid, Ring terminal with purple wire for the "S" terminal on the Starter Solenoid

Manufacturer Part Number : 41641

Part Notes:

Manual Trans Also Requires Part 17365 TCS Extension. Harness Must Be Used With A Forward Lamp Harness Modified For An Int Regulated Alt. If Using Your Original Forward Lamp An Adapter & Instructions Are Included To Alter Your Original Harness. With original pin type oil pressure sending unit. Comfortron Air Conditioning. Factory-installed RPO C60.