1964-1977 Chevelle Holley Mid LSA, LS Accessory Drive Bracket Kit Alternator, Natural 20-166

1964-1977 Chevelle Holley Mid LSA, LS accessory drive bracket kit alternator, natural. If you're looking to swap an LSA or LS engine into your vehicle but your engine didn't come with an alternator bracket or the factory setup is too wide to fit your project, Holley has the answer. The 20-166 Bracket tucks the Alternator in closer toward the engine when compared to the original LSA accessories, giving more clearance where needed. These brackets look truly at home on the LSA engine, so much so that nobody will realize it didn't come from the factory this way.

Features:

• Compatible with the original LSA damper and pulley and similar aftermarket versions
• Compatible with all Holley Alternators
• Notably more clearance to swap applications than other options
• Compatible with Holley PN 20-160 compact SD7 AC kit
• Compatible with LSA and 2010-15 LS Camaro water pumps
• OE pulley ratios for optimal accessory performance, allows for larger SC crank pulley
• Original Equipment look Available in Natural and Black Finishes

Manufacturer Part Number : 20-166

Part Notes:

Torque M10 bolt to 36 ft.lbs. When wiring the alternator, install the included 197-400 plug into the alternator. Next, connect the yellow wire to switched voltage that is "on" when the key is in the run position. If the vehicle has a "charge indicator light", the yellow wire can be connected to that circuit. This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.