Performance Automatic Torque Converter, 11 Inch TH350, 2500 RPM Stall PA35202

Performance torque converters are generally grouped by size (diameter) and stall speed.
As the diameter of a torque converter decreases, the stall speed (RPM) goes up. Most of the factory spec torque converters are 12-13 inch diameter and have a stall speed around 1600-1800 RPM. This promotes excellent fuel economy and driveability because they are specifically designed for these purposes.
The problem arises when the modifications are done to the fuel system, camshaft or other engine control systems. Smaller diameter torque converters are needed to provide more slip at idle. This allows engines with a lot of camshaft to idle better. As the torque converter and horsepower range is moved higher through the RPM range, the smaller torque converters with their higher stall speeds provide maximum torque multiplication where needed. Also, the same torque converter will react differently when used behind different engines. Performance Automatic converters will make your car or truck perform to its utmost potential.
11 Inch Converters:
Designed with performance in mind, our 11 inch torque converters are built to take the punishment. Fully furnace brazed with extra bearings and balanced to provide years of dependable service. This famous 11 inch torque converter is Performance Automatic's hottest selling street strip converter. Designed to give approximately 1000 RPM stall over a stock converter, this unit will provide a greater launch and low end power. it is engineered to withstand the punishment of full throttle starts.
Features:

• Balanced
• Furnace brazed
• Needle bearings
• Approximate 2500-2800 RPM stall
• Bolt in
• Fully streetable and super launches

Manufacturer Part Number : PA35202

Part Notes:

This is the same converter that is included in Performance Automatic Street Smart systems.