1970-1988 Monte Carlo EFI Fuel System Kit 20 Feet No Return With Pump 526-5

1970-1988 Monte Carlo Holley EFI fuel line kit. Holley EFI fuel kits are the perfect addition to your Sniper EFI or Holley EFI kit. They are engineered using Holley fuel pumps, regulators and filters coupled with quality Earl's plumbing to provide a fuel system tailored to the needs of your EFI System. The secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.

Features:

• 20ft of 3/8 inch Vapor Guard Fuel Hose
• 12-920 Fuel Pump
• Pre and Post Fuel Filters!
• Necessary hardware and bulkhead fitting to return fuel into the tank
• Multi-layer rubber hose designed to withstand to the corrosive properties of modern fuels
• Compatible Fuel: Approved for use with leaded and unleaded Gasoline

Specs:

• Forced Induction HP at 43PSI: 600
• Forced Induction HP at 60PSI: 530
• Fuel Type: Pump Gas and Race Gas
• GPHat 43PSI: 67
• GPH at 60PSI: 62n
• Hose Length: 20 feet
• Hose Size: 3/8 inch;
• Naturally Aspirated HP@43PSI: 800
• Naturally Aspirated HP@60PSI: 690
• LPH at4 3PSI: 254
• LPH at 60PSI: 235
• Warning: This kit is recommended for pump or race gas use only. The included fuel pump is not compatible with E-85.

Manufacturer Part Number : 526-5

Part Notes:

This part is legal for sale or use on Racing Use Only Vehicles The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.