1970-1972 Monte Carlo Super Sport Dash Conversion Kit with Dakota Digital HDX Gauges, Black Gauge Face SSDASH-HDX-K

Whether you are replacing an original dash or converting from a sweep style dash to a Super Sport dash, but want more modern functionality from your instrumentation than stock gauges can provide, Ground Up has you covered! This deluxe 1970-1972 Monte Carlo SS dash conversion kit includes a Dakota Digital HDX Instrumentation System with black alloy gauge faces and user selectable illumination, as well as the standard components featured in our factory SS dash conversion kits!
HDX-70C-CVL-K: Upgrade your 1970-1972 Monte Carlo SS with a bolt-in instrument system boasting six analog gauge sweeps, coupled with a pair of TFT message center displays. Original locations for turn signal, high beam and brake indicators are updated with LEDs. Screws directly into an original or aftermarket gauge carrier.
Each HDX system allows the user to select independent illumination colors for the gauge readings and needles, as well as the message centers. Calibration and personal settings are manipulated with the built-in, capacitive-touch buttons, or the available Bluetooth app for Apple and Android devices. Each needle hub is black nickel plated spun-aluminum to match the buttons. All HDX instrument systems feature dead-faced indicators (turn signals, high beam, check engine, cruise control, parking brake, plus two user-definable) and a red, settable warning light for each gauge. With our central control box, installation is greatly simplified with vehicle-harness sourced signals and supplied, solid state sending units connecting cleanly to their respective terminal.

Kit Contains:

• (1) Super Sport Steering Column Cover
• (1) Super Sport Dash Bezel New Improved With Chrome Trim
• (1) Dash Gauge Housing
• (1) Glove Box Door
• (1) Super Sport Dash Ash Tray
• (1) Super Sport Brake Light Lens
• (1) Dakota Digital HDX Instrument System - Black Alloy Gauge Face

Manufacturer Part Number : SSDASH-HDX-K

Part Notes:

New, replacement OEM wiring is not required if you already have wiring in your vehicle. Dakota Digital Instrumentation Systems include a central control box that contains the necessary wiring and senders for operation with your OEM harnesses. These systems also have the ability to add many expansion modules, sold separately. When installing an LS motor, the BIM-01-2 OBDII module is a necessary addition to the Dakota Digital kit.