1971-1972 Chevrolet Holley Sniper EFI Fuel Tank System 750 HP 19-416

Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling, a fuel level sender, and the filler neck. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project! Supports up to 750 HP EFI at 60 PSI at 13.5 Volts 10.4 AMP Draw.FeaturesTanks are coated galvanized steel then powder coated silver for total corrosion protection400 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietnessSender has .25 inch NPT Supply and Return line ports for easy fuel line connection and a barbed vent fittingFuel level sender included with the correct Ohm range for your factory gaugesFuel pump and sender are recessed in the tank to provide an easy installation with no modification to your carEFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvationFits and looks like an OE tank when installedComplete bolt in solution for your EFI conversion

Manufacturer Part Number : 19-416

Part Notes:

GM Offered Two Depths of Fuel Tank Caps. If you have the deep reach 1.375 inch, you may have to switch to the shallow reach cap 1.25 inch depending on your application. Hose clamps are not included for two piece filler neck. For a better seal use Permatex Indian Head Gasket Shellac compound or aviation Form-A-Gasket sealant on the gasket and screws.Helpful Articles:

• Prepping for Fuel Injection