1982-1992 Chevrolet UMI Torque Arm Relocation Kit, T5 & 700R4 - Black 2228-B

This 1982-1992 Chevrolet torque arm relocation kit from UMI performance is designed to remove the front mounting point of the torque arm off the transmission and protect the tail shaft from damage. General Motors tail shaft mounted design works great for a stock driven vehicle, however it is not designed to take abuse and hard launches. This setup replaces your transmission cross member with a new stronger setup with a built in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock style aftermarket torque arm as well as the factory torque arm. The relocation kit also features instant center adjustment by moving the front of the torque arm up or down. This unit is built using DOM mild steel tubing, 0.188 inch mild steel mounting plates and includes all appropriate hardware needed for the installation. The torque arm mount is machined from 0.250 inch thick mild steel and features a new clam shell for appropriately attaching the torque arm to the new cross member. This relocation kit will work with both the manual T5 and automatic 700R4 transmission.Features:Supplied with a built-in torque arm mount, removing the torque arm from the transmission tail shaft and protecting the tail shaft from failureDesigned to tuck tight against the vehicle chassis and will not effect vehicle ground clearanceThis setup will work with virtually any torque arm on the market as long as it bolts into the stock location. It will also work excellent with the stock torque arm when using a 1 piece bushingThis kit is 100% bolt-in and requires no drilling, cutting or welding. It bolts in place of the stock cross member using the existing holes

Manufacturer Part Number : 2228-B

Part Notes:

This must be used with a solid one piece polyurethane bushing. It will not work with the factory bushing that utilizes a two piece design. If using a stock torque arm with this relocation kit, an aftermarket polyurethane bushing must be purchased.