1978-1988 G-Body UMI Front Bump Steer Adjuster Kit 3060

UMI's G-Body bump steer kit is designed to reduce or eliminate toe change during suspension travel (also known as bump steer). Reduction of bump steer improves handling and straight line stability and enhances overall precision of the steering system. These direct bolt-in kits allow the builder to relocate the outer tie rod end lower than stock (or higher if necessary). The stud taper is designed for exact factory fit for each application and is constructed of 4140 CrMo for strength and durability, no spindle drilling required. The adjuster is 6061-T6 aluminum hex for lightweight strength and features a hard anodized protective finish. Kit includes shims of 0.125 inch, 0.1875 inch, and 0.250 inch. These race tested bump steer kits are 100% designed and manufactured with pride in Philipsburg, PA - USA.Features:4140 CrMo stud constructionRace quality rod end, jam nuts and locking hardwareLaser cut spacers: 0.125 in. / 0.1875 in. / 0.250 in.6061-T6 aluminum toe adjuster, hard anodized, 5/8 RH and 5/8 LH threads, 9.200 in. sleeve lengthWorks with factory inner tie rods and factory spindleSimply bolt-on. No spindle drilling requiredInstructions with technical links includedManufactured with pride in Philipsburg, PA - USABattle tested on the UMI G-Body test car

Manufacturer Part Number : 3060