1982-2002 Camaro UMI Sway Bar Installation Kit, 3 1/4 Inch Axle Tubes, Black 2244-325-B

If you have an aftermarket rear end and no way to install a rear sway, this kit is the solution. This kit includes everything needed to install a factory or aftermarket sway bar to your new rear end. Supplied with this kit is new bolt on CNC machined bushings mounts, heavy duty zinc plated chrome moly u-bolts and longer end links. This kit places the sway bar below the larger center section on aftermarket rear ends and provides proper clearance. The supplied longer end links provide the proper geometry of the rear sway in its new mounting location.
Installation: This kit is a 100% bolt-in application for the 1982-2002 Camaro, it requires no welding! The sway bar mounts feature CNC machined teeth designed to grip into the rear end securely fastening the sway bar in place. Without these teeth, the sway bar mounts may shift on the rear end, binding the sway bar end links and applying pressure to them. Unlike our competetor's design, our sway bar mounts also feature gussets welded on each end to prevent the brackets from spreading while tightening.
Kit Includes:

• CNC machined sway bar mounts with grip teeth and gussets
• Correct diameter heavy duty chrome moly u-joints
• Longer Energy Suspension polyurethane end links

Axle Tube Diameters:

• Strange Engineering and Currie rear ends use 3 inch diameter axle tubes
• Moser Engineering 12-bolt rear ends use 3 inch diameter axle tubes
• Moser Engineering 9 inch rear ends manufactured after early 2002 use 3 inch axle tubes. Rear ends manufactured prior to early 2002 use 3.25 inch axle tubes. Please verify diameter before ordering.
• Other brand rear ends will vary, please check your axle tube diameter before ordering

Manufacturer Part Number : 2244-325-B

Part Notes:

This kit will also work on adapting a rear sway bar to vehicles that were not supplied with a sway bar from the factory.